Blade-AL Or Similar, 2013-2017 Dodge Viper

Home / the12volt's Install Bay / Car Security and Convenience / Blade-AL Or Similar, 2013-2017 Dodge Viper

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

occpilot

Member - Posts: 1

Joined: March 02, 2024

Location: California, United States

Posted: March 02, 2024 at 10:50 PM / IP Logged

Hello,

I was wondering if anyone has had any luck with doing a non-analog install of a compustar/blade-al on a fifth generation dodge viper 2013-2017? I used the t-harness for a dodge/chrysler and everything connected as it should. The problem is that when I flash the blade-al using a charger/challenger of similar year (CH7), it doesn't recognize the unlock/lock codes. I was hoping that there was a firmware that someone has gotten to work. The BCM seems similar to the other dodge products.

Thank you

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.