Firewall drilling on my ford taurus 93?

Home / the12volt's Install Bay / Car Audio / Firewall drilling on my ford taurus 93? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

manning58

Copper - Posts: 52

Joined: June 14, 2003

Location: United States

Posted: June 19, 2003 at 10:34 PM / IP Logged

Im wondering if somone could tell me around where on my Ford Taurus 1993 to drill for my power wire, I dont want to damage anything. Please help!

Niko Suave

Self Installer

Back to Top

Tcole

Copper - Posts: 92

Joined: October 04, 2002

Location: Canada

Posted: June 20, 2003 at 9:34 AM / IP Logged

Try under the dash/drivers side, there should be a small area were a clutch would be mounted if you had a manual. You will need to take out a small amount of firewall insulation that hides the area. Check it out, its worth a try.

Back to Top

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 20, 2003 at 1:46 PM / IP Logged

listen your will be ok just look at the engine side of firewall and match it by eye on the under dash side (drivers side) than drill hole you'll be ok

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Firewall drilling on my ford taurus 93?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.