Problems with hornet 554t

Home / the12volt's Install Bay / Car Security and Convenience / Problems with hornet 554t (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 29, 2003 at 6:24 PM / IP Logged

installed a Hornet 554T, and when the car alarm is disarmed, it blinks 3 times and then 2 times, and repeats.

also, the the manual setup to change the factory settings doesn't work, when you hold the valet button in to select which menu you want it doesn't chirp like its suppose to

jaxman

Copper - Posts: 185

Joined: November 16, 2002

Location: Denmark

Posted: August 30, 2003 at 8:47 AM / IP Logged

Check your ignition wire !

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 30, 2003 at 10:24 AM / IP Logged

the ignition wire is fine, it does it when the car is off and also when the car is on

jaxman

Copper - Posts: 185

Joined: November 16, 2002

Location: Denmark

Posted: August 30, 2003 at 1:23 PM / IP Logged

The manual says . Open a door and have the ignition turned on and back off.

If the ignition wire is not conected correctly or if the door contact is not correctly installed you won't be able to use the ghost switch.

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 30, 2003 at 3:22 PM / IP Logged

i doubled checked it and it is connected right

jaxman

Copper - Posts: 185

Joined: November 16, 2002

Location: Denmark

Posted: August 30, 2003 at 3:53 PM / IP Logged

3 flashes = Door Switch Trigger

2 flashes = Instant trigger - a heavier impact detected by the shock sensor

Will the LED status reset after you turn the ignition on and back off ?

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 31, 2003 at 4:55 AM / IP Logged

no it does it when i drive also

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 31, 2003 at 6:37 AM / IP Logged

i mean i tested the door trigger w/ mutlimeter, also i tested it by opening the door while armed, it went off. i've also tested teh shock sensor....

so this means that its not resetting?

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 31, 2003 at 8:37 AM / IP Logged

ok, i'm a dumbass :( anyway i didn't connect any of the relays because i thought they were for remote start only, and i don't want to use remote start just yet... they mainly are but i guess the alarm functions off the pink wire from the relay, so thats why its not resetting, i'm going to install the pink wire only and connect (h3) to the alarm

apursell

Member - Posts: 22

Joined: June 24, 2003

Location: United States

Posted: August 31, 2003 at 10:00 AM / IP Logged

jaxman, you were right all along, i didn't connect the pink wire from the satellite relay, because most of it is for remote start, :( thanks for you help

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.