Ram 03 pick up

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Ram 03 pick up (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

audioconcepto

Member - Posts: 1

Joined: October 14, 2003

Location: Mexico

Posted: October 14, 2003 at 3:04 PM / IP Logged

we are having trouble with the remote starter, it strart and 10 seconds later it turns off, we all ready put the transponder bypass and the 2 ignicion cables

Back to Top

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: October 14, 2003 at 5:05 PM / IP Logged

do you have the negative starter wire hooked up right?

Back to Top

kenmci

Copper - Posts: 161

Joined: July 15, 2003

Location: United States

Posted: October 14, 2003 at 10:50 PM / IP Logged

You may want check that you have a valid tach wire. IF you do then it make need to be set to low voltage sense if possible, if that doesn't work then you can try using just voltage sense instead of the tach wire.

Back to Top

warren-g

Member - Posts: 1

Joined: October 15, 2003

Location: United States

Posted: October 15, 2003 at 4:52 AM / IP Logged

this vehicles does not have a second starter wire

it does have a second ignition it is RED / wht there are 2 RED / wht wire one is constant 12votls other is second ignition

this vehicle also has 2 heat/ac wire you must activate

there are greeen and 2nd is orange

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 15, 2003 at 5:39 AM / IP Logged

Sounds like the tach did not learn the first time properly. Make sure you let the truck idle for at least 10 minutes before attempting to learn the tach . If the truck starts and runs fine for 10 seconds, it's your tach learning that is not correct. Try this and post your results.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ram 03 pick up

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.