speaker box pics

Cut the plexi with eclipse logo..or the name in it. thus. you'll have the pexi and a grill to protect it.  Frost the edges and put in a neon bar or LED's and it'll light up.

i would make it like a console with the plexi showing the bottom of the subs, and fire them down onto the floor, but then you would have to brace that sucker up good for the eclipses.  you could blow the box up.

Product Description:

• High Current Circuitry
• PVM MOSFET Power Supply
• Double Sided Glass Epoxy Circuit Board
• S/N Ratio: >100dB
• Frequency Response: 10Hz-40,000Hz (+/- 1dB)
• Remote Bass Control With Blue Backlight Knobs
• Variable 24dB Hi-pass Crossover: 50Hz-750Hz
• Variable 24dB Low-pass Crossover: 30Hz-120Hz
• Variable Bass Boost: 0-18dB
• Variable Bass Boost Frequency: 40Hz-100Hz
• Variable Subsonic Filter: 20Hz-45Hz
• RCA Throughput Connections
• 4-way Protection Circuitry: Thermal, Short Circuit,
• Overload, and DC Offset
• Dual Cooling Fans
• VU Meters Indicating Output Response
• Cobalt Blue Illumination
• High Gloss Chrome Plated Finish

Specific Features:

• 4 Ohm Stereo: 200 X 2 Watts
• 2 Ohm Stereo: 400 X 2 Watts
• 1 Ohm Stereo: 600 X 2 Watts
• 4 Ohm Mono: 400 X 1 Watts
• 2 Ohm Mono: 800 X 1 Watts
• 1 Ohm Mono: 1600 X 1 Watts
• Height: 3 11/16"
• Width: 12"
• Depth: 23 1/16"

i know i have plenty power, but my question is, would i have enough air space required for 2,  12" eclipse titanuims or even the aluminums?

Eclipse alum 12's like a sealed box with about 1.25 cu.ft gross volume per sub, so about 2.5cu.ft for 2 subs. I would recommend that you build the box with two separate chambers.