the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

mustang 2001 alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
maxx3616 
Member - Posts: 20
Member spacespace
Joined: December 13, 2002
Location: United States
Posted: December 04, 2003 at 10:10 PM / IP Logged  
i m going to install a after market alarm.... do i have to take out the existing factory alarm..or do i just tap into it?
alarmpro 
Copper - Posts: 110
Copper spacespace
Joined: September 17, 2002
Location: United States
Posted: December 04, 2003 at 10:23 PM / IP Logged  
Most likely its not an alarm just a keyless entry system with horn honk..(no shock sensor)You have to disable it or they will set each other off....go to the car diagram section of this site and see the disable wire color to disable it...
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: December 05, 2003 at 11:04 AM / IP Logged  
check this post out
its a good idea to leave the fact. unit intact, some car's resource is depended on the unit.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
maxx3616 
Member - Posts: 20
Member spacespace
Joined: December 13, 2002
Location: United States
Posted: December 11, 2003 at 2:20 AM / IP Logged  
so i should leave the keyless entry alone?
i had another question
do i have to use any relays for my installation? or could i just tap into the wires i need to use?
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: December 11, 2003 at 2:36 AM / IP Logged  
definitely leave teh keyless alone.
what type of alarm is this?
assume this is for security and keyless, no remote start
door locks-no
siren-no
trunk pop-definitely have to
disarm-depend on alarm unit
the rest of the wires are plug and chug
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
maxx3616 
Member - Posts: 20
Member spacespace
Joined: December 13, 2002
Location: United States
Posted: December 11, 2003 at 9:49 AM / IP Logged  
its the black widow... with lcd remote..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer