wiring 2 R.F. FFS1224 12'' dvc's to BD 1000

Home / the12volt's Install Bay / Car Audio / wiring 2 R.F. FFS1224 12'' dvc's to BD 1000 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Homicyde

Member - Posts: 20

Joined: March 24, 2003

Location: United States

Posted: December 08, 2003 at 7:05 PM / IP Logged

i thinking of getting 2 R.F. FFS1224 12" dvc's and using a BD 1000 mono amp. What is the best way to wire the subs. They will be in a sealed box firing down. Any help will be appreciated.

Back to Top

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: December 08, 2003 at 8:32 PM / IP Logged

NOT RECOMMENDED. The Bd1000 amp is designed to be ran at a 2ohm mono load, you have chosen subs that will present the amp with either a 1 ohm mono load (bad) or 4 ohm mono load (good but lost half the power - so bad). Choose subwoofers that have a rating of between 400-600w rms, an impedance of either 4ohm single voice coil or dual 2 ohm voice coil. This will present the amp with a stable load that the amp was designed and engineered to run. Good choice on the sealed box. Make sure the amp is grounded direct to the battery, or if grounded in the back of the vehicle, a ground return resistance of below .5ohm or expect problems with any Rockford amp.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

BmpnSilvi98

Copper - Posts: 15

Joined: January 25, 2003

Location: United States

Posted: December 08, 2003 at 9:25 PM / IP Logged

May I suggest a jbl bp1200.1 1ohm and 2ohm at 1200 watts rms. and also for the money that you could get a hundred times better amplifier than rockford by getting a memphis st1000d.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring 2 R.F. FFS1224 12'' dvc's to BD 1000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.