Command start cs 2400 bypass hook-up

Home / the12volt's Install Bay / Car Security and Convenience / Command start cs 2400 bypass hook-up (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chrisjo

Member - Posts: 7

Joined: December 06, 2003

Location: Canada

Posted: December 15, 2003 at 7:19 AM / IP Logged

I don't have a wiring diagram for the cs 2400; which wire can I use to hook up a transponder bypass module?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 15, 2003 at 3:19 PM / IP Logged

You will need to use the VIOLET wire and program it too in channel 2 Step 4 option II

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

chrisjo

Member - Posts: 7

Joined: December 06, 2003

Location: Canada

Posted: December 16, 2003 at 8:06 AM / IP Logged

Thanks Velocity Motors, do you have the installation instructions for the cs 2400? I'm not sure what you mean by programming it in channel 2 step 4.

I am doing this for a friend who bought the 2400 a few years ago and had it recently installed by a dealership but they told him that it wouldn't work because of the PATS, they told him to get one from them. I think it should work with a bypass module. ( this one is in a 2003 windstar)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Command start cs 2400 bypass hook-up

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.