1999 GMC Truck Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 1999 GMC Truck Remote Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

atcodoctor

Member - Posts: 22

Joined: January 20, 2004

Location: Canada

Posted: January 25, 2004 at 12:02 AM / IP Logged

I just installed a Valet 561R into my 1999 GMC 2500. It works great.

But I have 2 questions

1) Does somebody have a wiring diagram on how to hook up the arm and disarm feature (using the Valet key fob) I am connected to the Lt Blue and White at the BCM and this works Ok, but should i be connected to the Lt green also. Do i use the disarm and rearm (light GREEN/ black and GREEN / WHITE) wires of the Valet 561R module. I noticed some topics about using diodes this is where a diagram would be nice.

2) When i remote start the truck and let it run the 12 minutes and it shuts off i noticed 30 minutes later that the radio was still playing inside, when i opened the door (drivers) the radio shut off. Is this normal or is there a way around this.

TheDoctor

Back to Top

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: January 25, 2004 at 9:12 AM / IP Logged

atcodoctor wrote:

2) When i remote start the truck and let it run the 12 minutes and it shuts off i noticed 30 minutes later that the radio was still playing inside, when i opened the door (drivers) the radio shut off. Is this normal or is there a way around this.

The vehicle has RAP (Retained Accessory Power) which allows the driver to use power accessories for 30 minutes after the the key is turned off if they remain in the vehicle. You may be able to use your GREEN / WHITE (-) Factory rearm output and a relay to pulse the driver's door trigger after shutdown. I think this would trick the computer into thinking the door was opened and the power accesories will turn off. 1999 GMC Truck Remote Start - Last Post -- posted image.

1999 GMC Truck Remote Start - Last Post -- posted image.

Back to Top

tblanning

Copper - Posts: 60

Joined: March 28, 2003

Location: United States

Posted: January 25, 2004 at 9:31 AM / IP Logged

you need to use the LT/Green of the truck to disarm so when remote starting the alarm will not go off use the disarm wire from your remote starter unit to disarm truck should arm it self when you lock he doors

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 GMC Truck Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.