the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 Ford explorer sport


Post ReplyPost New Topic
< Prev Topic Next Topic >
cuttdawg85 
Member - Posts: 30
Member spacespace
Joined: December 27, 2003
Posted: March 12, 2004 at 10:00 AM / IP Logged  
I had a question about wiring the door and rear speakers to a amp. I will be replacing all the factory speakers with aftermarket ones. My question is can i use the factory wiring still, i was going to tie the front speaker wires to the rear speaker wires  up at the head unit, and run new wires off the rear, that way i dont have to run new wires from all the way up front. Can this be done on the explorer?? I believe it has the jbl system, it does have the factory sub in the back, but has a clarion radio installed with a wiring adapter.. Can i go with this route or do i need to run all new wirs to the front also??? Like in some of the older aerostars. Thanks for your help in advance
Metra Tech 
Copper - Posts: 125
Copper spacespace
Joined: October 21, 2003
Location: United States
Posted: March 12, 2004 at 12:15 PM / IP Logged  
On your vehicle this can not be done as there are no wires up front for speakers. Up front there is only a signal from the radio to the tuner pack/amp in the rear. Running wires will yield you better results anyway and  help you in getting a noise free installation.
cuttdawg85 
Member - Posts: 30
Member spacespace
Joined: December 27, 2003
Posted: March 12, 2004 at 12:21 PM / IP Logged  

Ok thanks, where exactlly is the factory amp located, it is a 2 door explorer sport?? And also can i use the spaeker wires at the amp?? Bypassing the amp and just using th speaker wires that are at the amp??

Thanks

Metra Tech 
Copper - Posts: 125
Copper spacespace
Joined: October 21, 2003
Location: United States
Posted: March 12, 2004 at 12:28 PM / IP Logged  

Behind the panel in the rear, on the passenger side, on top of the wheelwell. I wouldn't use the factory wire but that's my personal opinion.

cuttdawg85 
Member - Posts: 30
Member spacespace
Joined: December 27, 2003
Posted: March 12, 2004 at 12:35 PM / IP Logged  

Ok thanks, i appreciate the help, im not sure hat ill do about the wiring yet, its not my car, someones im working on, ill give them both options and let them decide. Thanks Again!!!!!!!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer