Dynomat

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Dynomat (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Allstate45

Member - Posts: 1

Joined: March 17, 2004

Location: United States

Posted: March 17, 2004 at 12:25 PM / IP Logged

Do anyone know where I can get some dynomat for cheap? any web sites ? I need to do my trunk before it gets hot.

itsonery

Member - Posts: 6

Joined: March 16, 2004

Posted: March 17, 2004 at 1:55 PM / IP Logged

you can try ebay, usually u can get a good deal, try second skin, i saw it used in a few installs at a local shop and it made a really big difference.....

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: March 17, 2004 at 5:41 PM / IP Logged

or go to a menards or homedepot or lowes, and go to the roofing section and they have the same stuff, foil one side and the other side is "tar like" sticky as sh*t, bout 6" thickness and 10-25 ft rolls. Same thing except you don't have to take out a loan just to have "dynomat" printed on the foil! hehe costs about 1/4 of dynomat. And to be honest I was a fool and bought dynomat for my doors and I did the passenger side, then I got the roofing stuff and did my driver side in the same places and my passenger side still rattles a slightly and my drivers side doesn't make a peep!

go custom or go home!!

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: March 17, 2004 at 10:17 PM / IP Logged

Just to correct this post...the material is called "Dynamat."

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: March 18, 2004 at 7:53 AM / IP Logged

OOPs! dynamat, dynomat RIP OFF!! MAT!! whatever! hehehe you're dumb if you you buy it!

go custom or go home!!

hammondc

Copper - Posts: 112

Joined: September 24, 2003

Location: Texas, United States

Posted: March 18, 2004 at 2:09 PM / IP Logged

ok, I have given this secret to a few people and they have been very pleased. Go mcmaster.com. The sound/vibration damping stuff starts on catalog page 3266. On page 3270, you will find adhesive backed dmping sheet. CHEAAAAAP. I used the polymeric mastic (item# 9709T19). IT IS THE SAME AS DYNAMAT. IT IS NOT SIMILAR, IT IS THE SAME!! 32"X54" sheet is 14.62. NOBODY can match that with dynamat. This stuff works great. And being so cheap, you can double and triple layers easily. Above this product is a 5 gal bucket of roll on damping compound. I haven't tried it but, I am sure it works. Quit supprting Dynacrap and go get it cheap. It is black and doesn't advertise dynamat all over it.

Ok, I am the man!

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: March 18, 2004 at 5:03 PM / IP Logged

there ya go, that sound even better expense wise, so now you're really a damn fool if you buy dynadookie!!

go custom or go home!!

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: March 18, 2004 at 6:27 PM / IP Logged

hammon thanks a lot im gonna try that stuff asap.

dream it, build it, fiberglass it

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: March 18, 2004 at 6:31 PM / IP Logged

o yea hammon about how much is the shipping?

dream it, build it, fiberglass it

hammondc

Copper - Posts: 112

Joined: September 24, 2003

Location: Texas, United States

Posted: March 18, 2004 at 7:02 PM / IP Logged

the shipping is VERY reasonable. I had about $75 worth of that matting. My shipping was $15. Also, they have like 5 or 6 warehouses, so most shipments are 2 days or less away. My box weighed about 20-25 lbs. Give 'em a try. You WILL NOT be disappointed. Also, if someone gets the Bucket of damping compund, let me know how it works.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.