l.e.d. install

Home / the12volt's Install Bay / Car Security and Convenience / l.e.d. install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

12v nut

Member - Posts: 20

Joined: September 12, 2004

Location: United Kingdom

Posted: September 12, 2004 at 2:38 AM / IP Logged

Hi,

for my first post i would like to wire a red led to a mom/off/mom switch which is negative.

The switch is linked to aftermarket central locking, i would like it to illuminate when locked, then go off when it

recieves the next - pulse unlock.

Any ideas.

Thanks

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: September 12, 2004 at 7:02 AM / IP Logged

is this just to show you when the doors are locked??

if so you can use a 12 volt LED....you will need some relays.....i will see if i have a diagram...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

12v nut

Member - Posts: 20

Joined: September 12, 2004

Location: United Kingdom

Posted: September 12, 2004 at 10:42 AM / IP Logged

Thanks,

to show red when locked, i have a 12v led and some relays at the ready.

It is for a vans rear cargo doors.

Thanks

Back to Top

RufNUSD

Copper - Posts: 184

Joined: December 10, 2002

Location: United States

Posted: September 12, 2004 at 8:43 PM / IP Logged

Uh, just use the latched relay setup in the diagram section of this forum. You will kill your battery pretty quick due to the energized batteries in combination with your amperage pull of the LED. Cheers.

Someone pass me that bottle.

Back to Top

12v nut

Member - Posts: 20

Joined: September 12, 2004

Location: United Kingdom

Posted: September 14, 2004 at 3:43 PM / IP Logged

The led is to remain on only when the van is on the move,surely this wont kill the battery?

The led only shows when the cargo doors are locked by a switch on the dash,the alarm takes over to lock automaticaly

when the vehicle is not used.Cheers

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

l.e.d. install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.