Bypassing A Positive Clutch For Remote St

Home / the12volt's Install Bay / Car Security and Convenience / Bypassing A Positive Clutch For Remote St (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

newinstaller

Copper - Posts: 160

Joined: July 11, 2004

Location: Canada

Posted: November 14, 2004 at 8:46 PM / IP Logged

Hi,

I would like to know how to Bypass A Positive Clutch For Remote Starting?

How would I wire up a relay?

Thanks

TJ92Civic

Copper - Posts: 161

Joined: November 13, 2004

Location: United States

Posted: November 14, 2004 at 9:08 PM / IP Logged

Check here

http://www.velocitymotorsport.com/images/install_notes/146.jpg

newinstaller

Copper - Posts: 160

Joined: July 11, 2004

Location: Canada

Posted: November 14, 2004 at 9:31 PM / IP Logged

Hi,

That does not say much.

Am I to use a relay?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 14, 2004 at 9:33 PM / IP Logged

you may need to use a relay................

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

newinstaller

Copper - Posts: 160

Joined: July 11, 2004

Location: Canada

Posted: November 14, 2004 at 9:34 PM / IP Logged

ok I have never installed a starter on a car that is stick with a + clutch

How would I hook that up?

Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 14, 2004 at 9:56 PM / IP Logged

To wire up the clutch bypass for a (+) set up with a SPDT relay to this:

30 - To (+) input wire for clutch activation
87 - To 12 volts constant ( Fuse at 20 amps )
85 - Status output or ground out when running wire (-)
86 - Starter Output (+) from remote starter or from vehicle
87a - NOT USED

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

newinstaller

Copper - Posts: 160

Joined: July 11, 2004

Location: Canada

Posted: November 15, 2004 at 9:45 AM / IP Logged

Hi,

Thanks for the info.

audiopete

Copper - Posts: 82

Joined: March 10, 2003

Location: United States

Posted: November 15, 2004 at 5:45 PM / IP Logged

? what is the best way to hook up a remote starter to a manual car

viper91180

Member - Posts: 14

Joined: December 25, 2003

Location: Canada

Posted: November 15, 2004 at 7:06 PM / IP Logged

but do you really need the relay? i thaught all you had to do was run the start wire from the modual to the side of the clutch switch that swithces power to the starter? on a positive type that just inerupts the power.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 15, 2004 at 7:12 PM / IP Logged

audiopete wrote:

? what is the best way to hook up a remote starter to a manual car

In what regards ? That is pretty vague , please elaborate.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.