the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Escape Alarm/Remote Start


Post ReplyPost New Topic
< Prev Topic Next Topic >
Tickard63 
Member - Posts: 1
Member spacespace
Joined: November 24, 2004
Location: United States
Posted: November 24, 2004 at 9:05 PM / IP Logged  

I have a fully loaded 2002 Escape and I would like to install the ford remote start /alarm system. Do I have to disable g.e.m unit to install this? Or can I just install it

jtmack1 
Member - Posts: 10
Member spacespace
Joined: May 11, 2004
Location: United States
Posted: November 25, 2004 at 7:14 PM / IP Logged  
Ive done them before and I have never had a problem. I dont think that the escape needs a gem wakeup like some of the other new fords. You do need to run power for the remote start to the battery. The ignition harness isnt strong enough. You should also use a transponder bypass that has a keysense shutoff circuit because ive had problems with the ecu dumping the codes for the keys if you dont.
audiopro111 
Copper - Posts: 160
Copper spacespace
Joined: September 24, 2004
Location: United States
Posted: November 25, 2004 at 8:04 PM / IP Logged  
if your vehicle has a C.A.N.  system u have to be carefull with the type of test light u use since this can cause key dropping and factory keyless to stop working as long as u use a computer safe test light u should be okay........
AudioPro111

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer