kenwood navigation unit install help

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / kenwood navigation unit install help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wozz4422

Member - Posts: 6

Joined: December 29, 2004

Location: United States

Posted: December 31, 2004 at 4:15 PM / IP Logged

I have just gotten done installing a kenwood kvt-815dvd receiver in my dodge durango. I had also installed a sirrus reveiver and a 10 disk changer also a kenwood kna-dv4100 navigation system. Everyting works except for the navigation unit. It will load the disk into the navi unit but nothing will ever come on my screen or anything any help would be appreciated

Dan

Back to Top

wozz4422

Member - Posts: 6

Joined: December 29, 2004

Location: United States

Posted: December 31, 2004 at 8:01 PM / IP Logged

Ok , i found it the one ground wire was loose now everthing is working fine.Thank you everyeone for all the help you gave me in this project

Dan

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood navigation unit install help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.