Plye pwd 103 lock/unlock

I have a plye pwd 103 Keyless entry w/ built in lock relays,Hooked it up on a 1992 Nissan Stanza. My question is with the wiring of the door locks would i connect the wires just like I was wiring up relays.. here is the wire diagram

Violet - unlock #87 Normally open input [10A fuse]

Blue/Black - Unlock #30 Common Output

BROWN / Black - Unlock #87a Normally Closed Output

Violet/Black - Lock #87 Normally Open Input [10A fuse]

GREEN/ Black - Lock #30 Common Output

WHITE/ Black - Lock #87a Normally Closed Output

The reason I ask is that the way they say to hook up a negative pulse system would be to

Hook Blue/Black(Unlock #30 Common Output) - to Door lock

BROWN / Black(Unlock #87a Normally Closed Output) - Door Unlock

Violet(unlock #87 Normally open input) - to Ground

Violet/Black(Lock #87 Normally Open Input) - To Ground

And dont use the GREEN/ black & WHITE/ black

it dosn't work in fact gives the unlock a ground at connection..

Have anybody every used one of these pyle units