2000 Camry Tach Wire

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Camry Tach Wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

illmattix

Member - Posts: 31

Joined: May 02, 2002

Location: United States

Posted: February 19, 2005 at 11:38 AM / IP Logged

Just wondering if anyone knows exactly where the tach wire is on a 2000 Camry. The sheet says Black(AC) or Yellow/Red Ignition Driver's Side. I can't find that color. Is it under the hood or inside the car???

Thanks

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 19, 2005 at 11:58 AM / IP Logged

Black and orange @ the ECM behind the glove box , OR under the hood. On the four banger, its on the end of the drivers side valve cover in a whitish grayish plug with 4 wires stickin out of it. Use the black one.

On the 6 cylinder, go to the coil on the DRIVERS side,and use the yellow/red

Back to Top

illmattix

Member - Posts: 31

Joined: May 02, 2002

Location: United States

Posted: February 19, 2005 at 1:44 PM / IP Logged

Thanks Guys.

Back to Top

illmattix

Member - Posts: 31

Joined: May 02, 2002

Location: United States

Posted: February 19, 2005 at 4:15 PM / IP Logged

Alright, I can't seem to find anything yellow/red at the left shock tower or anywhere on the driver's side under the hood for that matter. I'm also having another problem. I'm getting the starter relay to engage when i try to remote start but the car won't start. Is there some kind of security thing that i need to buy a bypass for???

Back to Top

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: February 20, 2005 at 7:44 AM / IP Logged

Tach signal has to be learned first!

Be careful whose advice you buy, but be patient with those who supply it. 2000 Camry Tach Wire -- posted image.

Back to Top

johnnyb1231

Member - Posts: 34

Joined: February 20, 2005

Location: United States

Posted: February 20, 2005 at 9:25 AM / IP Logged

on just about every car i do i use the "uncommon colored" wire off of one of the coils or fuel injectors... on most toyotas however i usually just drop the glove box and pull it off the ecm

dont know if this will be any help but just some food for thought

Back to Top

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: February 20, 2005 at 10:11 AM / IP Logged

Here is the info. Good luck

TACH BLACK OR GRAY (-) SEE NOTES*

* 4 CYLINDER MOTOR USE THE BLACK WIRE IN THE GRAY PLUG AT THE COIL ON THE DRIVERS SIDE OF THE MOTOR 6 CYLINDER MOTOR USE THE GRAY WIRE LOCATED AT THE IGNITOR ON A BRACKET JUST IN FRONT OF THE STRUT TOWER. THE MODULE SAYS DENSO ON IT

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Camry Tach Wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.