2000 grand am security light staying on

Home / the12volt's Install Bay / Car Security and Convenience / 2000 grand am security light staying on (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: March 21, 2005 at 7:13 PM / IP Logged

Hey guys i have a customer who will be returning b/c her security light stays on after the vehicle has been r/s'ed,and while driving ...any ideas? the car is a 2000 pontiac grand am

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 21, 2005 at 9:44 PM / IP Logged

There is a problem with the bypass or bypass wiring. You should try by checking the wiring out. You should also triple check the ground. If all the wiring checks out then replace the module and see if the problem still persists. I have had a ton of DEI 555Ls go bad.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: March 22, 2005 at 6:14 PM / IP Logged

make sure you get the right wires for 555l sometimes is white or black or ORANGE / black

how own your mind, control your life.

MECP certified. always use a DMM

Back to Top

Denny10700

Member - Posts: 7

Joined: February 21, 2005

Location: Canada

Posted: March 24, 2005 at 6:43 AM / IP Logged

I have a 200 s10 with the same prob. Any info on your vehicle would be much appreciated.

Thanx Denny

Back to Top

mnviking28

Member - Posts: 28

Joined: December 27, 2004

Location: Minnesota, United States

Posted: March 24, 2005 at 3:41 PM / IP Logged

I have to agree. It almost has to be a passlock issue. If it is just a little off, it will still start, but will trip the security code. Use a good quality dmm and compare the voltage when started by the key as compared to started by r/s. Make sure they are the same.

MNViking28

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 24, 2005 at 7:43 PM / IP Logged

What bypass did you use ? I know in the past I have made the mistake of placing the jumper on some of the bypasskit.com modules in the wrong orientation and it worked, but the security light or passlock light was left on until the key was removed and restarted.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: March 30, 2005 at 11:09 PM / IP Logged

hey thank you for all the responses.The customer should return in about a week...so you think the module is bad...hmmmmm.the first one i used didnt even work...thanks again and i will re-check the wiring,

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 grand am security light staying on

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.