Hitech alarm troubles

Home / the12volt's Install Bay / Car Security and Convenience / Hitech alarm troubles (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 11, 2005 at 4:53 PM / IP Logged

this alarm sounds like alot of work guys good luck with this install on your cars let me know how it goes and if you need any help i will try my best to help you out.

nguyenphananh

Member - Posts: 19

Joined: May 04, 2005

Posted: May 11, 2005 at 7:34 PM / IP Logged

hi Joe

do you have this same alarm too? if you do were you sucess in install and program, make it works properly? if you were, did you connect all the wires? or only parts of it? thank you for the infor

joe_1

Silver - Posts: 286

Joined: November 12, 2004

Location: United Kingdom

Posted: May 12, 2005 at 4:24 PM / IP Logged

no sorry i have got that rsx3.5 clifford that wasnt a problem to install but i have done other alarms with crap instructions they are anoying so i can understand the frustration.

cees2u

Member - Posts: 1

Joined: May 27, 2005

Posted: May 27, 2005 at 12:28 PM / IP Logged

I deffinately understand your problems. i bought the same system (mainly for the keyless entry). when i got it partialy installed i realized that the the automatic arming feature is on ny default. that is why the doors keep locking. i was going to hook up everything except the starter kill. but in order to disable the automatic arming feature you have to have the starter kill hooked up too. it really sucks. so i finally just got sick of it and took out everything except the keyless entry system. good luck

cees2u

Diceman83

Member - Posts: 1

Joined: July 06, 2005

Location: United States

Posted: July 07, 2005 at 12:19 AM / IP Logged

Hey All,

I just joined for this thread because I've been searching all over the net for anything on this sucky company. Reason why: I just got a HT-455 as well for 45 bucks on ebay. I now know what a dormer is and the engine cap is.

I don't know how to wire the ignition kill switch and relay though. I figured it was supposed to put a break in the wire that carries the current to the starter coil itself, but I don't know for sure. At the moment I have it wired in to the engine fuse box in place of the 50 amp fuse for ignition, but I can't get it to disable (it's starting regardless of which wire has power and/or ground).

I'm wishing someone knew how to contact this crazy company, but it's almost like they don't exist. It claims to have all the features most alarm systems have, which is why I bought it, but when I got it, the "manual" proved that ya get whacha pay for.

Thanks all!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hitech alarm troubles

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.