2001 Chrysler T&C no sound

Zorro33,

I have given up for now...I have the Alpine installed with the factory unit tucked under the passenger's feet.  To get sound, I had to run extensions of the power, ground, and the pink/grey wire with the white clip to the factory unit.  The important one seems to be the pink/grey one since it somehow "talks" to the Town & Country and "tells" it to turn on the stereo system.  When I get some time, I plan to disassemble the Chrysler radio to see if I can take a smaller portion of it out and hide it behind the console.  Good luck and please let me know if you find a better solution!

OK... for all those wanting to power up the OEM amplifier on the Infinity systems here's what you have to do:

These wires are found behind the OEM deck:

On the black plug ( with the locking tab on the top ) go the the last wire on the right side, it's a LIGHT GREEN wire. This is the OEM remote turn on lead for the Infinity system. Use the remote turn on lead from the Alpine ( BLUE/WHITE ) or use the ignition lead fron the deck to turn on this wire ( RED / WHITE on grey plug ).