05 nissan murado

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 05 nissan murado (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

asiaadad

Member - Posts: 16

Joined: July 08, 2002

Location: United States

Posted: November 03, 2005 at 9:48 PM / IP Logged

hey guys,

does anyone know how to catch the door lock circuit on this vehicle without going to the drivers door module????/ the bcm has a 5wire but only the drivers door will unlock using this method.

any help would be greatly appreciated.

thanks much

mike

mike holbrook

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 04, 2005 at 1:48 PM / IP Logged

At the BCM pins 13 and 14 (no wire there) are the lock/arm (pin 13) and the disarm/unlock (pin 14) you can solder on to the back of the board or try and feed a wire into the socket. Im not sure what the door boot looks like, but Id rather run wires thru into the door than solder onto a BCM curcuit board!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 nissan murado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.