88 Tercel remote start

I have an 88 Toyota Tercel 5 Speed Manual that I am installing a car starter in and would like information on the proper wiring connections. Thank you

       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        | |              12V|wht/red & blk/red   |+ |ignition harness            | |          STARTER|black *1            |+ |ignition harness            | |        IGNITION|RED / blue            |+ |ignition harness            | | SECOND IGNITION|BLACK/ white        |+ |ignition harness            | |        ACCESSORY|BLACK / YELLOW        |+ |ignition harness            | |       POWER LOCK|GREEN / WHITE        |- |passengers kick             | |     POWER UNLOCK|RED / white           |- |passengers kick             | | PARKING LIGHTS +|green               |   |drivers kick               | | PARKING LIGHTS -|lt. green           |   |steering column             | |       HEADLIGHTS|RED / blue            |- |steering column             | |     DOOR TRIGGER|RED / white           |- |drivers kick               | | TRUNK/HATCH PIN|RED / yellow *3       |- |theft ECU *4               | |        HOOD PIN|lt. GREEN/ black     |- |theft ECU *4               | | FCTRY ALARM ARM|arms with lock      |   |                            | |FCTRY ALRM DISARM|disarms with unlock |   |                            | |       TACHOMETER|BLACK/ blue          |   |check connector *2          | |       BRAKE WIRE|RED / white           |+ |brake switch               | |     HORN TRIGGER|GREEN/ YELLOW        |- |steering column             | |           WIPERS|blu/blk-l,blu/red-h |- |steering column             | | LF WINDOW UP/DN|red - green        |A |drivers door switch        | | RF WINDOW UP/DN|blu/red - blu/yel   |A |drivers kick panel          | | LR WINDOW UP/DN|grn/red - blue      |A |drivers kick panel          | | RR WINDOW UP/DN|grn/blk - blu/blk   |A |drivers kick panel          | Notes: *1 One of two black wires. The other wire is an airbag wire. Test with a DIGITAL multi-meter to identify. If you test the wrong wire with a test light of any kind (including computer safe versions), the airbag light will come on and need to be reset by a Toyota dealer. *2 The check connector (diagnostic) is located in the left rear corner of the engine compartment. The tach can also be found at the ignitor in the same location. *3 Found at the pin or light in the trunk on models without anti-theft. *4 The anti-theft module is located in the drivers kick, just left of the fuse box.Be careful whose advice you buy, but be patient with those who supply it.

Once again...you are the MAN.....thank you

Hi Pencil I am having a trouble finding the Tach wire. I have looked atthe 'Diagnostics' plug and there is no BLACK/ blue wire. Is there a way to tell which wire it is?

Using digital multimeter. Put your setting to AC. Black probe to ground, red on the wire you think is the tach wire. A good tach signal is between 1-8 volts when your rev the engine. If the reading fluctuate, then you have locate the tach. The other way is using the injector wire for tach. Look for the uncommon wire on all the injector, that will be your tach signal wire.        Be careful whose advice you buy, but be patient with those who supply it.