Windshield Sprayer LED's

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Windshield Sprayer LED's (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

v-bizzle

Member - Posts: 5

Joined: November 16, 2005

Posted: November 19, 2005 at 12:46 PM / IP Logged

I just got some windshield sprayer LED's for my '98 Civic HX and i have no clue how to how to hook them up. There is a black and a red wire coming from them and i want to hook them up to a switch. Any help?

Back to Top

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: November 21, 2005 at 3:26 PM / IP Logged

black = ground

red= power

Back to Top

ringojam

Copper - Posts: 215

Joined: June 10, 2003

Location: Manitoba, Jamaica

Posted: November 21, 2005 at 8:45 PM / IP Logged

As above butput red to park light + and that will be your switch Windshield Sprayer LED's -- posted image.

Jamaica home of the worlds fastest man.

Back to Top

v-bizzle

Member - Posts: 5

Joined: November 16, 2005

Posted: November 22, 2005 at 12:33 AM / IP Logged

I'm really a noob.......i dont know how to hook the wires to the battery. What do i use to hook it to the battery? And where is the parking light switch?

Back to Top

captjimmy15

Member - Posts: 4

Joined: November 30, 2005

Location: United States

Posted: November 30, 2005 at 11:02 PM / IP Logged

i have a 98 dodge dakoda with 6 wiper LEDs on it, 2 on the hood and 2 in the grill they r wired into the foglights. the other 2 LEDs i have are hooked up to the turn signal lights (ie the right LED flashes when im turning right and left flashes when im going left). currently i have the lights all wired into the preexisting fog light switch so LEDs are on when the fog lighs are( excluding the turning LEDs). so if u want to go that road u can tap the LEDs u want to install in to ur headlighs or something and just add a switch somewhere along the new LED wires.

See corny picture for example...

NOTE: FRONT FACING LEDs ARE ILLIGAL IN MOST STATES TRUST ME I KNOW =(

CaptJimmy

Back to Top

cowboy21

Copper - Posts: 64

Joined: October 31, 2005

Location: Australia

Posted: December 07, 2005 at 7:17 AM / IP Logged

for added effect run a 12v+ source to a switch, then to the red wire, ground the black wire to a good grounding spot (ie the screws for your window wiper motor) then u can leave them on with ur headlights off or on, good luck

modest yet effective... ECLIPSE 12", Venom 8"x2, Focal 5 1/2" comp.,Response amps x2 (580WRMS total @ 4Ohms), Pioneer TFT + DVD, good for 148.7dB

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Windshield Sprayer LED's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.