nitro alarm, 93 BMW 325is

Home / the12volt's Install Bay / Car Security and Convenience / nitro alarm, 93 BMW 325is (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nyteryda

Member - Posts: 3

Joined: October 20, 2005

Location: United States

Posted: December 07, 2005 at 6:52 PM / IP Logged

Hey Everyone,

I am new to the forums. Just wondering if anyone could help me on instructions or info on how to install a nitro bmw 2way alarm on 1993 BMW 325is. Thanks to anyone that can help me out.

alpinejedi

Member - Posts: 17

Joined: December 07, 2005

Location: United States

Posted: December 07, 2005 at 9:01 PM / IP Logged

First, if you havent been trained to put in an alarm I wouldnt try it yourself . But if you want to heres the techsheet for it.

12volt- RED / wht or red + ingition harness

starter-blk / YELLOW or blk + ignition harness

ignition- green + ignition

power lock- WHITE/ red + The alarm plug is a black 12 pin plug located just behind the glove box. It is mounted with the pins facing you atop a vent just to the left of the body computer. Other wires at the alarm plug are: 12V- RED / white; Accessory- PURPLE / white; Siren- BLACK/ blue; Ground- BROWN / orange. Do not use the power sources at the alarm plug to operate high-current devices. The other side of the siren wire is mounted in a 2 pin plug at the passenger rear corner of the engine compartment. The other wire in the plug is a brown ground wire. DEI recommends attaching the siren at this point.

power unlock- blue/red + factory alarm plug

parking lights-blue/green - factory alarm plug

door trigger-Door triggers are BROWN / gray for the drivers front door, BROWN / blue for the passenger front door, and BROWN / black for the rear doors (if equipped). Use all three wires and diode isolate each. in factory alarm plug

Chad

Basic certified

Install Sr. at Best Buy

nyteryda

Member - Posts: 3

Joined: October 20, 2005

Location: United States

Posted: December 07, 2005 at 10:29 PM / IP Logged

hey thanks for the help. since my car is manual i won't be using the auto start option with the alarm. basically i just want the alarm so i don't gotta bother using the key to open the doors. Yea my factory controlls broke and the dealership wanted 110 for the damn remote so i was like I rather just get a whole new alarm then.

nyteryda

Member - Posts: 3

Joined: October 20, 2005

Location: United States

Posted: December 10, 2005 at 12:27 PM / IP Logged

I am confused. There are a couple of wire diagrams for my car. Which one is the right one for a 1993 BMW 325is? I had the factory alarm in my car but I am upgrading to the 2 way nitro

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

nitro alarm, 93 BMW 325is

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.