2000 Lexus RX 300, remote start/keyless

Any Help would be appreciated.

Installing Remote Start & Keyless Entry...No AlarmCustomer only has 1 Factory Key.Conflicting wiring??........One says I can do Door Lock / Unlock at Driver Kick & another says Only inside Driver Door.Also, info on site says Auto Lights will stay On after R/S??

THANKS in advance..........

Sounds like you have it well under control, what do u really need? You need a key for the security bypass, it is a transponder system in that vehicle.Gary Kline

MECP Master Technician

I need more Info..........

About:Headlites staying on after Remote Start times out?What Transponder to use, when Customer only has 1 Key?Door Lock / Unlock wires?

Or any other Info about Installation in this car..........

You can use a PKT from bypasskit.com They are an easy company to work with. Minumum order is only 2 bypass modules. Shipping is $4.99 for ground or $9.99 for overnight. They have a vehicle selector at the top of their page where you put in the vehicle type and it gives you what modules work with it. They also make a TOYDL that will do the doorlocks. I think a 555x or 555F from DEI will also work. Hook up the rearm wire from the remote start to the drivers door trigger wire. I have found you often need to use a relay to give it a stronger ground. You must be using a true door trigger wire. Pull the pin switch out and check the color of the wire, then find it in the drivers running board area. When the remote start shuts off it will pulse the door pin making the car think a door opened. The headlights should shut off right away, or a minute later depending on how the car usually acts. If it has a factory alarm, you must hook up a ground when running wire to the keysense wire to prevent the alarm from triggering.

Thanks for the Help............I'm supposed to get the vehicle friday, .....I am still gonna look for more infoThanks again