Security light Trailblazer

Home / the12volt's Install Bay / Car Security and Convenience / Security light Trailblazer (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

uffdog

Member - Posts: 45

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 01, 2005

Location: United States

Posted: December 13, 2005 at 1:25 PM / IP Logged

Just installed a remote start on 2003 Trailblazer

Problem: Security light stays on , any ideas how to get it off?

I originally started with a passlock dip switch model and cut pass lock wire, changed over to a Data bus gmdl-bp, resoldered the pass lock wires and now the security light is staying on as I drive.

Using an Astra 1000 RS, so far the RS is working fine , I just want to get the security lifght off, tried using a scan tool no luck.

any Ideas? email Ruffdog@AOL.com

rfd

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: December 13, 2005 at 1:36 PM / IP Logged

i know the XK01 has updated software for the security light issue.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

uffdog

Member - Posts: 45

Joined: December 01, 2005

Location: United States

Posted: December 13, 2005 at 1:41 PM / IP Logged

I don;t believe it's the bypass, while waiting for new gmbp-dl to arrive I had the issue after disconnecting the dip switch one, wondering if by soldering wire back together if I changed resistance in the wire and computers not reading it

rfd

Back to Top

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 13, 2005 at 2:18 PM / IP Logged

Did you cut the wire with ignition key in the on position?

Gary Kline

MECP Master Technician

Back to Top

uffdog

Member - Posts: 45

Joined: December 01, 2005

Location: United States

Posted: December 13, 2005 at 2:36 PM / IP Logged

I don't remember lets say i didn't have it in the on position?

rfd

Back to Top

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 13, 2005 at 6:49 PM / IP Logged

According to dei website under testing the passlock2 if the light is on solid must be reset by dealer. I have never personally had it happen to me so not for sure.

Back to Top

uffdog

Member - Posts: 45

Joined: December 01, 2005

Location: United States

Posted: December 14, 2005 at 7:46 AM / IP Logged

Ok I was able to troubleshoot the problem, I disconnected battery for 10 min and reprogramed the databus Bypass and it cleared the problem.

Light is now out, Thanks to all those guys that responded, you guys are an asset to this site and I hope I can return the favor someday

RFD

rfd

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Security light Trailblazer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.