all door unlock feature

I'm trying to do away with the feature of all door unlock.  how i need it to work is when the key is inserted in any of the doors, only that door will open, i found a wire in the door cylinder and disconnected it.  is there any other alternatives?  how can i make the alarm do priority door unlock (one pulse-one door, tow pulses-all doors)?

i also have a couple of questions concerning the security integrity of hondas.  any one feel up to the challenge let me know so that i could email them to you.  theese are good questions that i definitely want the answers to.

thanks in advanced.

Priority Door Lock Relay

Hey jeff...this might be an airheaded question, but, how is the signal going to be distinguishable to the relays if one wire comes out of the alram as "unlock (-) "  if tey're both tied into the same output, won't both relays give a ground to the actuators? 

thanks in advanced.

J.A.

I believe that diagram assumes you have an alarm with more than one unlock output.  Notice that one pulse goes to the first unlock relay, and the second pulse goes to the second unlock relay.

are there many alalarms that come with more than one unlock output?  mine only has one unlock, and one lock wires out of the brain module.

freedom 500 if you have any ideas.