add remote starter to existing alarm

I am adding a remote starter to a car that has a cheap no name alarm w/ a shock sensor and starter disable... Basically what Im trying to do is bypass the shock sensor and starter relay. But I really only have to bypass the shock sensor b/c I can just put the starter wire to the starter side.... Then  Run A relay on the power to the shock sensor w/ ground starter output from the remote starter???Does that sound right??? Any suggestionsTaking It 1 Wire @ A Time...

I would use the igniton output of the remote start to trigger a relay to break the power feed to the shock sensor.  This way, whenever the ignition is powered on the shock sensor won't work.Kevin Pierson

Pin 85 - Ignition out

Pin 86 - GroundPin 87A - Output to shock sensor power from AlarmPin 30 - Output to shock sensor power to shock sensor

Kevin Pierson

thanks I got itTaking It 1 Wire @ A Time...