2002 sebring, data bus

Home / the12volt's Install Bay / Car Security and Convenience / 2002 sebring, data bus (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

nima

Member - Posts: 36

Joined: September 27, 2004

Location: United States

Posted: March 24, 2006 at 11:13 AM / IP Logged

I have 2002 sebring saden.i have compuster and CHRDAA bypass module install.i have problem with lock and unlock, its work but intermition lock and unlock.some time i have to press twice to unlock and lock.any help will be good

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: March 24, 2006 at 11:34 AM / IP Logged

Tell me first how you tapped in for doorlocks.

Gary Kline

MECP Master Technician

nima

Member - Posts: 36

Joined: September 27, 2004

Location: United States

Posted: March 24, 2006 at 1:11 PM / IP Logged

From remote start lock and unlock wire to CHRDAA module. from module to data bus

xscash

Copper - Posts: 317

Joined: March 05, 2006

Location: United States

Posted: March 24, 2006 at 1:23 PM / IP Logged

does the remotestart output both neg and pos to lock wires? try using a diode to stop the pos.

nima

Member - Posts: 36

Joined: September 27, 2004

Location: United States

Posted: March 24, 2006 at 2:14 PM / IP Logged

what kind diod you want me to use 4001N? ,you want me to use on both lock and unlock side?

nima

Member - Posts: 36

Joined: September 27, 2004

Location: United States

Posted: March 24, 2006 at 2:16 PM / IP Logged

yes its both(+ and-) ,can you give me diagram for diod like wich side gose where

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 24, 2006 at 2:24 PM / IP Logged

The module is not working properly. I had problems with the all in one modules as well and I ended up using a polarity inverter with the resistors and it worked fine aferwards.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

xscash

Copper - Posts: 317

Joined: March 05, 2006

Location: United States

Posted: March 24, 2006 at 4:20 PM / IP Logged

toss a diode in line with each locking wire....silver line facing the remotstarter

good luck, XS

nima

Member - Posts: 36

Joined: September 27, 2004

Location: United States

Posted: March 25, 2006 at 3:54 AM / IP Logged

I try adding DIOD but it dose same thing.

Velocity Motors,

how can you add polarity inverter with the resistors. can you give me diagram and where can i get this polarity inverter with the resistors can you tell me detail........Thanks in advance

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 25, 2006 at 8:10 AM / IP Logged

Diodes will not help at all. The Compustar systems use a (-) trigger only and without relays or a polarity inverter.Lock is positive thru a 1800 ohm resistor, unlock is positive thru a 750 ohm resistor. A polarity inverter is a small device that converters a (-) pulse to a (+) pulse ( just like having a relay just alot smaller and less wires) all you needt o do is wire in the proper resistor value inline of the output on the inverter. You can accomplish the same task with just two relays wired in like this.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.