windows up from motion sensor

does your window rollup unit have a bypass if the wire remains on? if so here is a diagram to turn a momentary to a constant.

Momentary to Constant Output

Once activated by the relay on the left, the relay's coil on the right will stay energized until either ground or 12v(+) is removed. You can do this with another relay. Or try connecting to a 12v(+) switched source instead of a constant one. Or you can have a door trigger activate a relay to break continuity. The variations are practically endless.

How can i set it up for the motion sensor to send one pulse then it can not keep sendind a pulse untill it is disarmed and armed using the ground when armed wire as help.Because my aux wire sends a 1 second ground to trigger up.If not i will have to use lots of relays to change the aux wire to constent as well.The window module can be set up as either momentary pusle or constant or latched.Thanks