Viper 791 XV

Home / the12volt's Install Bay / Car Security and Convenience / Viper 791 XV (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

BoominRolla

Copper - Posts: 198

Joined: September 06, 2004

Location: United States

Posted: May 16, 2006 at 8:13 PM / IP Logged

How do I make the unit do a double unlock pulse? I have the 2 relays hooked up with the resistors.

The vehicle is a 2004 srt10 and the customer brought me this Directed alarm. I usually only install AstroFlex. So I have the experience I am just unfamiliar with the unit. I have the small blue wire saved out. and have tried hooking that up to the relays seperately and it dosen't work. CAN SOMEONE PLEASE HELP ME OUT HERE?? THANK YOU!!!

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: May 16, 2006 at 8:17 PM / IP Logged

go to the program section on the install guide it tell ya what featute it is.

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: May 16, 2006 at 8:41 PM / IP Logged

Page 45, Menu 2, feature 8.

Are you asking for a double pulse so that you can just use the factory alarm/disarm wire to lock/unlock? Or are you trying to do driver's door priority unlocking?

BoominRolla

Copper - Posts: 198

Joined: September 06, 2004

Location: United States

Posted: May 16, 2006 at 10:54 PM / IP Logged

Apparently the first pulse will disarm and the second will unlock. and I have confirmed this by testing. I 'm asking HOW I DO IT? I had a hard enough time with this thing learning the remote for it. I just get over excited when I have to open a door, turn the ignition on, hit the valet switch, hold the valet switch... I am used to flicking on an onboard dipswitch and hitting the brake and then being done with remote programming...

Anyone have a step by step or am I just lazy??... I just want to make sure this thing works flawless when the customer picks it up.

BoominRolla

Copper - Posts: 198

Joined: September 06, 2004

Location: United States

Posted: May 17, 2006 at 8:04 AM / IP Logged

do I need the bit writer? or a seperate diagram? Or is the double pulse in the programming? The truck will unlock the door if I press the button twice. But I wouldn't want it that way so i'm trying to program it for double unlock pulse...

THANK YOU!!

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: May 17, 2006 at 10:00 AM / IP Logged

First, I must apologize, it is option 7 not 8 of menu 2, 8 is double pulse lock.

The manual lists exactly how to turn on the double pulse unlock output, this feature is programmable without the need for a bitwriter.

With door open, turn the ignition on, then off. Press and hold the valet button until you hear two chirps. Release the valet button, press and release it seven times, after the seventh push, press it down once more and hold it, the siren will chirp seven times to confirm you are on the correct option. Press the unlock button on the remote, it will confirm by chirping twice. To exit the menu either close the door, turn on the vehicle ignition, or wait 15 seconds.

Hope this helps.

BoominRolla

Copper - Posts: 198

Joined: September 06, 2004

Location: United States

Posted: May 17, 2006 at 2:30 PM / IP Logged

How do I learn 2 remotes at the same time??????

BoominRolla

Copper - Posts: 198

Joined: September 06, 2004

Location: United States

Posted: May 17, 2006 at 3:07 PM / IP Logged

I did 8 and it WORKED!!! I tried 7 but option 7 is something about dome over ride chirp? or something?

Wow I guess if I would have sat down and concentrated (I had friends over that were asking me questions as I was trying to read) when reading the directions I could have figured it out but I REALLY REALLY APPRECIATE YOU HELPING ME!!!!!!!!!!! I guess the viper alarms aren't that scary to install afterall just takes maybe a few installs to get used to 'em? You helped me get it done and this guy is gonna be pumped (hopefully!!!)

THANK YOU TWELVOLTZ!!!!!!! and www.the12volt.com!!!!

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: May 17, 2006 at 3:42 PM / IP Logged

Just to clarify....

You did indeed press the button 8 times, however it is menu option 7 for double pulse unlock, 7 pushes, then an 8th push and hold. Option 6 is ignition controlled domelight on/off.

Congrats on getting everything going!

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: May 17, 2006 at 4:38 PM / IP Logged

after you learn the one remote, then do the 2nd one.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.