the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

94 astro door locks, relays


Post ReplyPost New Topic
< Prev Topic Next Topic >
rudydapimp 
Copper - Posts: 390
Copper spacespace
Joined: February 27, 2006
Location: United States
Posted: May 25, 2006 at 2:45 PM / IP Logged  
Hey all, I am hooking up a remote start/keyless Hornet 570T and I need negatives for the door locks.  The door locks are positives.  I have a bunch of relays,  but they only have wires in 30, 85, 86,  and 87a.  don't have any way to get more right now.  can I use these, if so, how.  diagrams I have seen need the regular 87, not 87a
rudydapimp 
Copper - Posts: 390
Copper spacespace
Joined: February 27, 2006
Location: United States
Posted: May 25, 2006 at 2:47 PM / IP Logged  
and they have diodes across them, from 85 to 86, with stripe on 85 side
ZipPhReaK 
Copper - Posts: 57
Copper spacespace
Joined: March 18, 2002
Posted: May 25, 2006 at 3:01 PM / IP Logged  
Cut the diode out, and use an additional wire with a 1/4" female quick disconnect for the 87 terminal in the relay harness.
You'll need two relay's, one for lock and one for unlock.
85 + Input from keyless
86 Gnd
30 - Lock/Unlock Output to Doorlocks
87a Not connected
87 GND
rudydapimp 
Copper - Posts: 390
Copper spacespace
Joined: February 27, 2006
Location: United States
Posted: May 25, 2006 at 3:28 PM / IP Logged  
i thought that I needed a 12 input as well
ZipPhReaK 
Copper - Posts: 57
Copper spacespace
Joined: March 18, 2002
Posted: May 25, 2006 at 3:55 PM / IP Logged  
+ = 12v
- = gnd
85 + 12v Input from keyless
86 Gnd
30 - Lock/Unlock Output to Doorlocks
87a Not connected
87 GND
ZipPhReaK 
Copper - Posts: 57
Copper spacespace
Joined: March 18, 2002
Posted: May 25, 2006 at 3:57 PM / IP Logged  
85 + 12v lock/unlock Input from alarm/rs brain
86 Gnd
30 - Lock/Unlock Output to Doorlocks
87a Not connected
87 GND
When you press the lock/unlock button on the keyfob... Terminal 85 Energizes, and engages the coil which swipes the wiper contact 30 to contact momentarily to pin 87.. Giving you your - pulse door lock outputs...

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer