bypass module, 99 chrysler lhs

Home / the12volt's Install Bay / Car Security and Convenience / bypass module, 99 chrysler lhs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

playboy00786

Member - Posts: 33

Joined: January 15, 2005

Location: United States

Posted: July 22, 2006 at 6:09 PM / IP Logged

i have a 99 chrysler lhs and im going to put a scytek galaxy 5100rs in do i need any sort of bypass module or if u can tell me everything i need to make this a clean install. Thanks

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 22, 2006 at 7:34 PM / IP Logged

Only vehicles with gray keys have the immobilizer. If you have a grey key, a DEI 555c will work for a bypass.

You will need a couple relays for the doorlocks, as well as one for the trunk release. You will also need a couple resistors for the locks. The value of the resistance varies depending on if the car has a factory alarm or not.

playboy00786

Member - Posts: 33

Joined: January 15, 2005

Location: United States

Posted: July 22, 2006 at 8:26 PM / IP Logged

Now i have another question

does anybody know what type of door lock system a 99 chrysler lhs has if not how would i find out. And do i need any type of resistors for my factory alarm

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 23, 2006 at 12:17 AM / IP Logged

The wire you need to use is lt. GREEN/ orange located in the drivers kick panel, or in the harness coming in from the drivers door. You will need to turn the key in the lock cylinder when metering it. It will not meter from the switch on the door.

Arm/lock is (+) thru a 1870 ohm resistor

Disarm/unlock is (+) thru a 680 ohm resistor

A single 680 ohm pulse will disarm the factory alarm. A second pulse will unlock the doors. Have both the unlock output and the disarm output of the remote start trigger the relay for disarm/unlock. Program the remote start to double pulse unlock.

john ogrady

Copper - Posts: 82

Joined: February 25, 2006

Location: Canada

Posted: July 24, 2006 at 9:08 PM / IP Logged

I would use a CHDL2-PK by-pass module.This takes care of everything locks,transponder by-pass,trunk and OEM alarm all in one unit from Omega.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypass module, 99 chrysler lhs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.