Viper 690XV bypass notifications

Home / the12volt's Install Bay / Car Security and Convenience / Viper 690XV bypass notifications (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

deb10042

Member - Posts: 21

Joined: February 27, 2006

Location: Germany

Posted: August 13, 2006 at 3:34 AM / IP Logged

Hi!

I've installed a Viper 690XV into my car (Nissan 350Z) and connected it to several sensors and modules - see attached plans.

My problem now is, that from time to time, when arming the system, the doors will close,windows will roll up but then, there is a bypass notification (LED blinking 4 times) of the dual zone radar sensor.

It happens not always, but very often.

Can someone explain to me, whether I connected something wrong or how I can avoid those bypass notifications?

Thanks a lot!

Back to Top

deb10042

Member - Posts: 21

Joined: February 27, 2006

Location: Germany

Posted: August 13, 2006 at 3:44 AM / IP Logged

Sorry, don't know why the second picture shows up like that! When creating the post, it looked quite normal :-(

Here it is again:

Viper 690XV bypass notifications - Last Post -- posted image.

Back to Top

deb10042

Member - Posts: 21

Joined: February 27, 2006

Location: Germany

Posted: August 21, 2006 at 12:31 PM / IP Logged

I found out myself, what was going wrong!

Last weekend, I went to town and bought a whole bunch of diodes Viper 690XV bypass notifications - Last Post -- posted image.

I installed some of them as shown in the attached picture, but it didn't help!

After trying a bit, I was lucky and found out, what to do else! I had to cut the ground for the radar sensor from the sensor harness and connect it to the orange ground when armed wire of the base unit. Thus, the radar sensor is not already turned on, while the windows are still closing, but only when the whole system arming mode is finished. The bypass notification seems to be gone Viper 690XV bypass notifications - Last Post -- posted image.

. Just to be sure, I installed some additional diodes into all these wires which will not do any harm.

Viper 690XV bypass notifications - Last Post -- posted image.

Thanks again and cheers!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 690XV bypass notifications

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.