2004 Sebring starter problem

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Sebring starter problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

azn_fcuk

Copper - Posts: 104

Joined: November 09, 2005

Location: Canada

Posted: October 15, 2006 at 4:46 PM / IP Logged

Thank you so much, i will be trying it out in a few days when i get back.

Thanks :)

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 15, 2006 at 4:57 PM / IP Logged

OK, so many installers make this mistake on chryslers it's not even funny.

First off, under the hood, look for a 20amp fuse that is blown.

second, remove your second power wire on the starter from the red wire at the ignition switch and connect both power wires to the pink/black.

problem solved.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 Sebring starter problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.