power lock config.

Home / the12volt's Install Bay / Car Security and Convenience / power lock config. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

michaelc

Member - Posts: 15

Joined: September 15, 2002

Location: Canada

Posted: January 22, 2003 at 6:19 PM / IP Logged

Trying to install an alarm in a 96 chev 1/2 ton, no keyless entry, what door lock relay diagram do i use??? My alarm puts out neg. pulse...Please help...

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 22, 2003 at 6:34 PM / IP Logged

1996 Chevrolet Full Size Pickup

Item

Wire Color

Polarity

Wire Location

12V

red

Positive (+)

ignition harness

Starter

yellow or purple

Positive (+)

ignition harness

Ignition

pink

Positive (+)

ignition harness

2nd Ignition

white

Positive (+)

ignition harness

3rd Ignition

pink/white [1]

Positive (+)

ignition harness

Accessory

orange

Positive (+)

ignition harness

Tachometer

white [3]

ECM [4]

Power Door (Lock)

lt. blue

[2]

either door boot

Power Door (Unlock)

white

[2]

either door boot

Door Trigger

purple or ppl/wht

Negative (-)

light switch

Dome Supervision

none

Headlights

yellow

Positive (+)

at switch

Parklight Positive

brown

Positive (+)

switch or fuse panel

Horn

black

Negative (-)

at column

Brake

white

Positive (+)

at brake pedal switch

Additional Info:

Make sure to enable second ignition wires for remote starts to prevent possible transmission damage and the check engine light from coming on. Diesel glow plug, dk. blue(+) located at the instrument cluster. [1] The pink/white does not exist on all models. [2] 5 wire on the two door models, and positive trigger on the four door and keyless entry models. [3] Tach wire on the 6.5 Diesel is white at the instrument cluster. [4] ECM located on drivers side inner fender well. Two plugs, white wire in plug marked "white".

J Rilla

Owner/Installer

Wolf-tech

Member - Posts: 26

Joined: January 20, 2003

Location: Canada

Posted: January 22, 2003 at 6:35 PM / IP Logged

power lock config. -- posted image.

Look for blue and white in drivers kick

michaelc

Member - Posts: 15

Joined: September 15, 2002

Location: Canada

Posted: January 22, 2003 at 6:39 PM / IP Logged

Thanxs a million guys.. this forum is great!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power lock config.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.