Valet 562T Remote Start Issue

on the r/s there will be a smaller harness that has smaller gauge wires than the rest. It has a blue wire, grey (hood pin), brown and a black with white stripe. That wire is the neutral saftyey switch. It needs to see ground for the car to start. This wire is probably just spliced to ground. Unhook from ground and attach the BLACK/ white to one side of a toggle switch and ground to the other. Thats itCruisin Security And Sounds

So which color wire is it? The grey one (cause thats what someone said earlier) or the BLACK/ white one as you just said. I will take it back to them, but doodie, if I can do it but by splicing and soldering a toggle switch into it, then Ill just save my time and do it myself.My Truck Electronics:

- Pioneer DEH-P4800MP HeadUnit w/ Sirius Radio

- Valet 562T Remote Start System

CruisinS&S wrote: YOU PAID FOR CC TO DO THE JOB RIGHT, WHY THE HELL SHOULD YOU FIX THEIR SHOTTY INSTALLS THATS CRAZY GO IN THERE AND DEMAND THEM TO INSTALL KILL SWITCH!!! If you do it yourself and take it back to them for an unrealated issue that you have, they might not warranty it b/c you messed with it after they did! BRING YOUR CAR BACK TO THOSE SCUMBAGS!

Couldn't have said it better myself!