the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

03 silverado crimestopper


Post ReplyPost New Topic
< Prev Topic Next Topic >
bry_gordan 
Member - Posts: 34
Member spacespace
Joined: November 01, 2005
Location: United States
Posted: December 08, 2006 at 9:10 PM / IP Logged  
instaled 1303 dp w/ a gmsl 2 lights and door locks work hit start and all it does is flash lights
Brian Gordan
prdjr165 
Copper - Posts: 293
Copper spacespace
Joined: October 31, 2002
Location: Illinois, United States
Posted: December 08, 2006 at 10:48 PM / IP Logged  
It sounds like either the hoodpin wire(gray)is grounded or the brake switch wire(purple)is seeing 12volts,either one of those will keep the vehicle from cranking.
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: December 09, 2006 at 5:00 AM / IP Logged  
Also make sure the both 12 volt power wires(red) are getting constant 12 volts.
bry_gordan 
Member - Posts: 34
Member spacespace
Joined: November 01, 2005
Location: United States
Posted: December 09, 2006 at 7:49 AM / IP Logged  
03 silverado crimestopper 1303dp2 w/ gmsl2  used 2 direrent sys. and it still starts and runs once fine but when you try it a second time it flashes the lights 5 times unplug it reprogram the gmsl2 same thang what am i doing wrong
Brian Gordan
barnold 
Member - Posts: 2
Member spacespace
Joined: August 19, 2006
Location: Afghanistan
Posted: December 12, 2006 at 3:05 PM / IP Logged  
i had the exact same problem this morning and it was just a bad module 1304 it was...  and if you use a gmsl2 i would  wire it conventional and not use the data link...
reisset 
Member - Posts: 38
Member spacespace
Joined: April 05, 2006
Location: Canada
Posted: December 12, 2006 at 3:32 PM / IP Logged  
What is the version of the GM SL2 ???
reisset 
Member - Posts: 38
Member spacespace
Joined: April 05, 2006
Location: Canada
Posted: December 12, 2006 at 3:33 PM / IP Logged  
What is the version of the GM SL2 ???
bry_gordan 
Member - Posts: 34
Member spacespace
Joined: November 01, 2005
Location: United States
Posted: December 14, 2006 at 9:08 AM / IP Logged  
i finaly got a hold of the company and the are sending a chip out  that has to be put in the box if you open the cover and it sayes 750 it is not compatable with gmsl2
Brian Gordan

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer