the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

compustar manual transmission


Post ReplyPost New Topic
< Prev Topic Next Topic >
ihkili18 
Copper - Posts: 108
Copper spacespace
Joined: November 07, 2006
Posted: December 18, 2006 at 4:58 AM / IP Logged  
jworm thanx so much thats exactly what i wanted to hear.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 20, 2006 at 8:49 AM / IP Logged  
When you drop the fuse box down, you will see a TON of green plugs. as you look at the fuse box, with the fusses towards the floor look at the green plugs the middle plug in the second row down has a FAT black and white. If you take your starter wire from your remote start brain to THAT wire instead of the starter wire at the ign. harness, you have just bypassed the clutch. Make sure you aaare monitoring the door pins, AND the e brake, so you can go thru the correct steps to exit the vehicle properly to remote start the car safely the next morning. If you have installed the unit correctly, you will exit the car with the keys in your hand and the engine won't shut off till you close the door. DON"T take any short cuts......
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 20, 2006 at 9:07 AM / IP Logged  
I agree use the RED / BLACK (-) Starter wire for the clutch bypass. I have done this for a while now and the (-) trigger works fine for all type 2 clutch bypass systems.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer