valet 561r, 04 nissan xterra

djfearny2 wrote: DIRECTWIRE™ WIRING INFORMATION - NISSAN / XTERRA / 2004 / Remote Start [PRINT THIS PAGE] 12volts green (40A)   +   ignition harness Starter BLACK / YELLOW   +   ignition harness Second Starter GREEN/ YELLOW   +   ignition harness Ignition BLACK/ white   +   ignition harness Second Ignition N/A        Third Ignition N/A        Accessory RED / yellow   +   ignition harness Second Accessory WHITE/ blue   +   ignition harness

Thanks, but there seems to be a discrepancy, according to a couple other wiring info's, the 04 xterra has 2 ignition wires and only 1 accessory wire. The 2nd ignition wire is RED / yellow.

Its OK to connect the two red 12v/30amp wires of the 561R to the one green wire at the ignition harness in the column ??

Yes it is OK to connect both reds to that wire. That wire is what feeds all of those circuits in the ignition harness when you turn the key. Also, for your reference I am pretty certain that the factory remotes will operate fine when the vehicle is running. Which means you could hook up the 561R without the need to interface with the door locks. You could use the WHITE/ red positive activation input to the door lock actuator's positive lock leg. Then use the factory transmitter, pressing lock 2 or 3 times (menu programmable) to activate and deactivate the starter. The range on the factory Nissan remotes is normally pretty good but the DEI range will be substantially better.Installer, IT support, and FFL. I need less hobbies.