2000 chrysler town and country, r/s

Home / the12volt's Install Bay / Car Security and Convenience / 2000 chrysler town and country, r/s (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Zeplin1073

Member - Posts: 19

Joined: July 08, 2004

Posted: March 09, 2007 at 3:57 PM / IP Logged

Just put in a auto page rs662 into a 2000 chrysler town and county. followed the tech sheet for the locks but it does have a foctory alarm but the resistors of 4020 lock and 665 unlock did not work, but 1500 lock and 250 unlock did. problem is this every so often the factory alarm goes off when the doors are unlocked by the alarm. has anyone heard of this? did i connect the wrong lock wires? oh yeah when I started this job the factory alarm was acting a bit strange since whenI went to get in the car and used the key to unlock the door it immediatly locked again and I had to giggle it a bit to unlock. any help would be appreciated.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2007 at 8:15 PM / IP Logged

What wire did you tap into for the OEM alarm disarm/unlock / arm/lock ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Zeplin1073

Member - Posts: 19

Joined: July 08, 2004

Posted: March 09, 2007 at 9:20 PM / IP Logged

WHITE/ green under fuse box.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2007 at 11:43 PM / IP Logged

There's a WHITE/ GREEN and a WHITE/ DARK GREEN.... which one did you tap into & Did you test the wire with a DMM ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Zeplin1073

Member - Posts: 19

Joined: July 08, 2004

Posted: March 10, 2007 at 8:55 AM / IP Logged

I grabbed the WHITE/ green and tested it with a dmm and it tested right. let me guess I grabbed the wrong wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 chrysler town and country, r/s

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.