alarm works but remote start dosen't

Home / the12volt's Install Bay / Car Security and Convenience / alarm works but remote start dosen't (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 5:48 PM / IP Logged

my lights dont flash at all

Search for other posts by harlyneisenmann

csorb

Copper - Posts: 317

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 5:49 PM / IP Logged

The control switch comes in the box with the unit. There is the pushbutton program switch and the red handled toggle control switch that must be plugged in and set to the on position.

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 5:51 PM / IP Logged

ialready did that but it still wont start. i have a harness that i havent hooked up yet cause i dont know how

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 5:53 PM / IP Logged

That harness is a auxilary output harness used for special applications. You should not need it for the car to start, or at least to get the park lights to flash. Did you check the hood pin switch to make sure that it is not grounding out?

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 5:55 PM / IP Logged

yes i even held it in my hand to see if it works but i got nothing

do i have to disable somthing

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 5:57 PM / IP Logged

Also

a)make sure that both fuses in the two thick red wires are good.

b) Make sure that you do not accidentaly have 12 volts on the BROWN / black (brake) wire

c) check the wires in the harness against the included diagram or against another unit. I have seen them screw up the wire locations when assemblying the harness.

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 5:59 PM / IP Logged

there all good but i read that i may have do disable somthing do you know of anything

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 5:59 PM / IP Logged

What procedure are you doing with the remote to try and start it?

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:01 PM / IP Logged

turn the ignition on then push the valet button 3 times shut off the car and then hold the start botton for 3 seconds

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:03 PM / IP Logged

The way to start the car with this system is to press the green button on the remote twice at the speed that you would say . " one thousand- two thousand".

csorb

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.