alarm works but remote start dosen't

Home / the12volt's Install Bay / Car Security and Convenience / alarm works but remote start dosen't (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:05 PM / IP Logged

i will try that

do you know if i have to disable anything

Search for other posts by harlyneisenmann

csorb

Copper - Posts: 317

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:06 PM / IP Logged

You do not have to disable anything.

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:09 PM / IP Logged

the process that you told me do i first turn on the the car and push the valet switch 3 times or just do the button thing

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:11 PM / IP Logged

Do nothing with the car or the valet button. Those procedures are for programming.

use only the remote. Make sure the ignition is off.

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:13 PM / IP Logged

didnt work

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:19 PM / IP Logged

Unplug 16 pin harness and check all your connection with a multimeter.

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:20 PM / IP Logged

k thanks if it dont work after that i will reply again

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:22 PM / IP Logged

You can put the system into diagnostic mode (perhaps remote start feature 7 or 9) and it should tell you the problem.)

csorb

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 09, 2003 at 6:36 PM / IP Logged

my lights blink 3 times

csorb

Copper - Posts: 317

Joined: December 28, 2002

Location: United States

Posted: February 09, 2003 at 6:41 PM / IP Logged

The manual should inform you of the problem for that code. Also I would double check the control switch and the hood pin now that you are starting it properly. Perhaps disconect the diodes from the hood pin altogether to make sure it's not reading a ground through the alarm trigger wire.

csorb

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.