the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Best 2 way for Manual Tranny


Post ReplyPost New Topic
< Prev Topic Next Topic >
wjg1 
Member - Posts: 3
Member spacespace
Joined: February 15, 2003
Location: United States
Posted: February 17, 2003 at 4:39 AM / IP Logged  
I have heard of many people having a negative view of the compustar piece I have a few dealers in my area that dont care for them. But i find that all those dealers have troble installing them. I have been a Compustar dealer for 5 years and i can say   there products may be a little more to install and teach a customer but once there in THEY work i have only replcaed 2 units in 5 yrs   a freind of mine is a Ultrastart dealers and he says there product is avg qaulity . AS for a neutral safety in manuals some cars do have i know a few ford and mazda's that due have them
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: February 17, 2003 at 9:31 AM / IP Logged  
wjg1, care to list what some of those cars are and where you find the wires? I know my WRX has a "Neutral Position Sensor" wire that I tied into my remote starter, but I found that out by reading an ECU wiring schemtaic of my car online.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: February 17, 2003 at 10:27 AM / IP Logged  
JWorm, what was the purpose of the sensor? I am just curious if more vehicles have one but it is just not public kmowledege like you mentioned. Also what year WRX is that?
J Rilla
Owner/Installer
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: February 17, 2003 at 10:36 AM / IP Logged  
Thanks jeff I got the first one, feel free to send the secondone anytime
J Rilla
Owner/Installer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 17, 2003 at 10:52 AM / IP Logged  
I'm just send the second one now. If it doesn't get to you within 5 minutes, then the file is too large & I will have to place it on my website for you to download to your computer. Let me know if it comes by or not.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: February 17, 2003 at 5:21 PM / IP Logged  
jrilla, I don't know what my car usesthe "Neutral Position Sensor" for, but its at the ECU (under carpet under where front passenger's feet would be) for some reason. The wire shows ground when in gear and +12v when in neutral. Hooking it up to the hood pin wire on a remote starter would prevent it from starting in gear. I have an alarm/remote starter so I have it hooked up a little different. Its an 02 WRX. I'm not sure if all manual Subaru's have that wire. Someday I'll check a customers car out while I have one in the bay.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: February 17, 2003 at 5:28 PM / IP Logged  
That is really slick I wish all manuals had one.
Thanks Jeff, I got the users manual and what looked like an advertisement, did you say you had an install manual?
J Rilla
Owner/Installer
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 17, 2003 at 5:58 PM / IP Logged  
I think I gave you the wrong one. I'll send you another link right now
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer