the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Carpet under sub airtight?


Post ReplyPost New Topic
< Prev Topic Next Topic >
luckydevil 
Silver - Posts: 365
Silver spacespace
Joined: July 04, 2005
Location: United States
Posted: May 30, 2006 at 12:47 PM / IP Logged  
I'm working on a new box and I was wondering if it matters whether or not there is carpet under the subwoofer lip when it is mounted.
I am thinking that the carpet may actually help to get an airtight seal, but then again bare wood is flat and could possibly give a better seal with a thin foam gasket.
I know this is pretty trivial, but I'm curious if one method is better or preferred over the other.
Thanks guys.
coppellstereo 
Silver - Posts: 785
Silver spacespace
Joined: November 21, 2005
Location: United States
Posted: May 30, 2006 at 1:07 PM / IP Logged  
I've never seen a box that mounted the drivers to bare wood. 
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: May 30, 2006 at 3:04 PM / IP Logged  
Carpet under the subwoofer mounting flange?  No, carpet is not a good idea as it is definitely not air-tight.  Use foam weather strip, silicone sealant or caulk, or some of the special rubberized speaker mounting gaskets.
Support the12volt.com
sab0276 
Copper - Posts: 61
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 21, 2006
Location: United States
Posted: May 30, 2006 at 3:19 PM / IP Logged  
So should you cut out some of the carpet so that the woofer mounts directly to wood?
-Scott
2002 GMC Yukon SLT non-Bose
Pioneer AVIC N3
Drewt 
Copper - Posts: 183
Copper spacespace
Joined: January 04, 2005
Location: United States
Posted: May 30, 2006 at 6:50 PM / IP Logged  
yes
I've used some weird removable weatherstripping for my previous subs (subs w/ rubber gaskets rock!!), it's a roll of 6-8 beads of weatherstripping. Wrap that around the sub, screw it in, let the excess seal squeeze out, then just peel it away.
good luck
boug0752 
Copper - Posts: 73
Copper spacespace
Joined: March 09, 2006
Location: United States
Posted: May 30, 2006 at 8:41 PM / IP Logged  
To be honost I haven't had any problems with air leakage through the area around the sub. Theoretically you should cut away the carpet and use some type of sealant but if its a ported box its most likely not going to be a problem.
If your counting pennies and dimes then maybe you shouldn't be spending every penny and dime you have!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer