the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

diy 04 civic viper proplems


Post ReplyPost New Topic
< Prev Topic Next Topic >
owen.kav35 
Member - Posts: 3
Member spacespace
Joined: December 17, 2013
Location: California, United States
Posted: December 17, 2013 at 8:24 PM / IP Logged  
i recently did a diy instal on my 04 civic. i installed a 350hv viper. no problems initially. today i put in a glass break sensor, tilt sensor, and back up battery and now its giving me a system armed with bypass notification. its triggering the notification on zone 4 which is the glass break sensor/ optional inputs. the only thing i have hooked up there is the glass break sensor but as far as i can tell the sensor is working correctly. what could be the issue?
powerslave 
Copper - Posts: 126
Copper spacespace
Joined: April 23, 2002
Location: United States
Posted: December 17, 2013 at 10:15 PM / IP Logged  
The output of the glass break sensor is not the right trigger or phase the alarm unit wants.
That means, for example, the trigger coming out of the sensor is opposite what the alarm wants. Say your sensor output wire is grounded when at rest, but the alarm wire is a NEGATIVE trigger, then it thinks the sensor is triggered.
IF the trigger is OPEN at rest, but the alarm trigger wire wants GROUND or POSITIVE at rest, then it thinks the sensor was triggered because it detects nothing.
owen.kav35 
Member - Posts: 3
Member spacespace
Joined: December 17, 2013
Location: California, United States
Posted: December 18, 2013 at 12:41 AM / IP Logged  
How would I go about fixing this. Currently I have the sensor wired with ground when armed to the orange ground when armed output of alarm. The instant trigger wired to blue instant trigger alarm wire and 12 volt constant wired to red 12 volt constant on alarm
owen.kav35 
Member - Posts: 3
Member spacespace
Joined: December 17, 2013
Location: California, United States
Posted: December 18, 2013 at 12:41 AM / IP Logged  
How would I go about fixing this. Currently I have the sensor wired with ground when armed to the orange ground when armed output of alarm. The instant trigger wired to blue instant trigger alarm wire and 12 volt constant wired to red 12 volt constant on alarm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer