the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how reprogram crimestopper?


Post ReplyPost New Topic
< Prev Topic Next Topic >
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: October 30, 2003 at 11:45 AM / IP Logged  
Hi
own a remote start/sec crimestopper system. Installedit two years ago; worked great until car got damagedand ended up in the shop. battery was disconnected fora long while; and now whenever I reattach the mainwiring harness the alarm won't stop going off.the remotes don't seem to effect the alarm?I think the remotes may no longer be programmed for theunit. Anyone know how I can reprogram my crimestopperremotes? I tried there website; couldn't find anything.
thanks!
peace
dangtong3 
Member - Posts: 5
Member spacespace
Joined: October 22, 2003
Location: United States
Posted: October 30, 2003 at 12:13 PM / IP Logged  
What model is it? Each model has different programing steps
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: October 30, 2003 at 3:51 PM / IP Logged  
This is a very typical sequence for many crimestopper models.
1. Open hood (ground the Gray hood pin wire if no hood pin is installed.)
2. Turn key to the ON position. (Doors will lock if Autolock is programmed)
3. Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
4. Press button #1 of the transmitter to be learned. You should get 2 light flashes indication the unit is waiting for a 2nd
code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd code and
lights will flash 4 times for 4th code. If all 4 codes are learned, the unit will automatically exit code learning mode,
otherwise turn key off and close hood. (See Diagram Below)
J Rilla
Owner/Installer
voltageGSR 
Member - Posts: 16
Member spacespace
Joined: October 13, 2003
Location: Pennsylvania, United States
Posted: October 31, 2003 at 1:28 PM / IP Logged  
thanks! will try it and get back to you.
peace.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer