the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

95 maxima factory security


Post ReplyPost New Topic
< Prev Topic Next Topic >
rovingtek 
Member - Posts: 7
Member spacespace
Joined: December 16, 2002
Location: United States
Posted: April 29, 2004 at 11:13 AM / IP Logged  
I want to install an aftermaket alarm system, but I was told that the factory sec sys has to be bypassed.
What's involved???
Thanks
eurotech 
Member - Posts: 44
Member spacespace
Joined: April 26, 2004
Location: United States
Posted: April 29, 2004 at 12:43 PM / IP Logged  
If your just adding an alarm, there is nothing special that you have to do.  the factory alarm arms with lock and disarms with unlock.  So as long as you hook your power doorlocks up on the alarm...you should be fine!
rovingtek 
Member - Posts: 7
Member spacespace
Joined: December 16, 2002
Location: United States
Posted: April 29, 2004 at 12:54 PM / IP Logged  
Thanks eurotech, but the problem is that I don't have the remotes and it seems to be armed now. Iwas told that it can be reset by unhooking the battery for a few and reconnecting, but every time the door gets unlocked it will arm again.
eurotech 
Member - Posts: 44
Member spacespace
Joined: April 26, 2004
Location: United States
Posted: April 30, 2004 at 1:10 PM / IP Logged  

It arms everytime it unlocks? hmm....are you sure you are just dealing with the factory alarm?  What happens when the alarm goes off?  Does it disarm when you unlock the door with the key?


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer