the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

nissan micra


Post ReplyPost New Topic
< Prev Topic Next Topic >
gpeen 
Member - Posts: 4
Member spacespace
Joined: January 11, 2011
Location: United Kingdom
Posted: January 11, 2011 at 12:58 PM / IP Logged  

wiring diagrm for a 2004 UK nissan micra 1.2 se 

 thanks, george

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 12, 2011 at 4:46 AM / IP Logged  
Is this the Mk ll or Mk lll, shape?
gpeen 
Member - Posts: 4
Member spacespace
Joined: January 11, 2011
Location: United Kingdom
Posted: January 12, 2011 at 5:12 AM / IP Logged  

not sure but i havent seen a newer shape

george

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 12, 2011 at 10:04 AM / IP Logged  
Assuming this is for an alarm, from memory:-
Remove top of dashboard, remove both "A" pillar side trims and then prise off dashboard top.
Top left is a module with various plugs.
These will give you lock and unlock (neg pulse) 2 or 4 door triggers, trunk (rear hatch) and possibly hood (bonnet) trigger. They have to be back dioded (look up Ford 1076 in the down loads on this site) then dioded together.
Also indicators, constant 12Volts and ignition. Remote start functions are controlled from the ignition switch loom via a 556UW, wired as European.
gpeen 
Member - Posts: 4
Member spacespace
Joined: January 11, 2011
Location: United Kingdom
Posted: January 13, 2011 at 11:27 AM / IP Logged  
thank you howie, any one know colour of wires?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 13, 2011 at 11:40 AM / IP Logged  
You got to be kidding! 12volt snap-on test light, best for this job. The bulb in it will trigger the locks.
Do what I did all three times I've done alarms on this baby, TEST
On a more serious note, nearside engine bay, there should be a grommet to bring in the siren and bonnet switch (unless the bonnet trigger is on the BCM module, test).
Apart from the siren and if needed, remote start, the whole job is done by sitting in the passenger seat, no bending down or praying at the dashboard. nissan micra -- posted image.
gpeen 
Member - Posts: 4
Member spacespace
Joined: January 11, 2011
Location: United Kingdom
Posted: January 13, 2011 at 11:47 AM / IP Logged  
ta

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer