2005 dodge ram diesel cruise

The high idle helps warm the truck up faster and to maintain heat while its idleing, also its hard on a diesel engine to sit at idle for to long because it is not burning the fuel properly were as at an high idle it is. To make the high idle engage start the truck set the ebrake and then just hit the cruise button to turn it on and the high idle is activate and it goes up too 1000rpm and then to increase it hit the accelerate button and each time you do it will increase 100rpm up to 1500rpm.

I thought if the cruise and accelerate worked of a negative or positive pulse then this could be done through the remote start as it has to aux channels, but if it works on a bus then this would be alot harder to do.

The only real reason I would want to do this from the remote I guess is because of laziness but I guess having command start is the same thing though. Just want to be able to start the truck and then increase the idle from inside the house and then in 10 minutes or so the truck is warmed up and ready to go instead of still freezing cold.